Product Details:
Minimum Order Quantity | 100 Square Feet |
Type | Vertical |
Brand | Glisten |
Weight | 500 gm app sq.ft. |
Shape | Vertical |
Blackout Rate | 105 |
Foldable | Yes |
Weight (kg) | 500 gm per sq.ft. |
Transparent | No |
Motorized | Yes |
Condition | New |
Thickness | 8.6 mm |
Diameter | 1.2 mm |
Extrusion | 21 mm |
Systems Black out roller blinds from the Prosolar range are manufactured using fabrics that would completely block out the light from outside when the roller blind is fully drawn . Black out roller blinds are used extensively in conference rooms and meeting rooms to hold presentations using projectors . Prosolar black out blinds can also be used in homes where complete privacy is required . They have also found an innovative use in bathrooms with glass walls to enable the user to have complete privacy and also to enjoy the openness of the glass wall when desired .
Available in Manual chain operation or automated using Somfy France motors and controls.
Controls could be a Switch , Remote and intelligent sensors to control the movement of the blinds to control temperature and light.
Available in a selection of colours to match room decor and choice.
Also available on special orders in high quality permanent Fire Retardant M1 grade fabrics from the Fireguard range from Dickson Constant , France.
The Fabrics from the Fireguard range are also printable in customised designs and motifs.
Specification:
ROLLER TUBE : The roller tube is an Aluminium extrusion of special alloy LM 6 , 40 mm outer diameter diameter and 1.2 mm thickness with a 8.5 mm groove designed to insert the fabric sealed to an insert for manually operated blinds . Motorised blinds use a 40 mm or 50 mm steel roller tube of 1.6 mm thickness.
LOAD BAR : The Load bar is another special aluminium extrusion of alloy LM 6 designed to hold fabric by inserting into a groove and providing a bottom weight to assist movement of the blind and keeping the fabric stretched . The Load bar extrusion is 21 mm outer diameter , 1.2 mm thickness and 8.6 mm groove . Internal ribs have been designed inside the extrusion to provide strength to the load bar and keep it straight for lengths upto 3 mtrs .
BRACKET SET : The Bracket Set is a molded plastic set of two brackets for either side of the Rolle tube in white colour . The bracket on the operation side is fixed and the opposite side is removable which is fixed during installation. The Bracket set can be used for a wall mountable or ceiling mountable installation.
END PIN : The End Pin is also a molded plastic component in white colour which acts as the opposite dead end of the roller tube . It is fixed to the roller tube and the move in bracket on the opposite side .
CHAIN CLUTCH: The chain clutch is a molded plastic component consisting of plastic gears and mechanism for operating the blind using a beaded plastic and thread chain . The Chain clutch is designed in a manner that the fabric can be stopped at any position along its height .
END CAPS : The end caps are molded plastic caps for closing the ends of the load bar and adding aesthetics to the blind .
CHAIN & CHAIN LOCK :The Chain is a white plastic beaded chain over special quality thread which moves in the chain clutch to roll the fabric over the roller tube . The Chain lock is a plastic lock to fix the length of the chain . It is openable thus making if flexible to alter the length of the chain is so desired .
Product Details:
Minimum Order Quantity | 11 Square Feet |
Thickness | 8.6 mm |
Specification:
Product Details:
Width of slats | 25 mm or 50 mm |
Thickness | 3 mm |
Specification:
Additional Information:
Additional Information:
Additional Information:
Product Details:
Number of Ribs | 8 |
Rib Size | 14 x 20 mm |
Central Pole Size | 30 mm |
Specification:
4.4/5
Rated by 14 Users